(Pair) of Smack Back Buggy Mirrors-Rectangle 8" x 4" (2 per pair)New
Smack Back Buggy Mirrors-Rectangle (SET OF TWO)
(SET of Two)13155-Rectangle (8" x 4")
Fits: 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8” and 2” Diameter Cages.
Sold as set of two.
Large Rectangle Shape (8" x 4").
Folds in for tight trails.
Can be mounted on the Passenger side, Drivers side, or use as Center Rear view mirror.
Extends 2" for more visibility.
These mirrors smack back out of the way in tight trails. They fit various size cages with the rubber shims provided. They extend out an additional 2” for extended view. The convex mirror give a good view up, down and to the sides.
These will fit just about all round UTV cages. They will not fit the Polaris Pro-Fit cage (non-round) used on some Rangers and Generals.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13155-Rectangle 8" x 4"(pair)Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RZR® 4|RZR® 570|RZR® 900|RZR® 900-4|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |RZR® S 1000|SPORTSMAN® ACE™|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Pioneer 500|Gator|Mule™|Teryx®|Teryx4™|RTV
(Pair) of Smack Back Buggy Mirrors-Round 5-1/2" Diameter Convex (Two Per Set)New
Smack Back Buggy Mirror-Round (Set of Two)
13155-Round-(Set of Two)
Fits: 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8” and 2” Diameter Cages.
Sold as set of two.
5-1/2" Round Convex mirrors expands view.
Folds in for tight trails.
Can be mounted on the Passenger or Drivers sides.
Extends 2" for more visibility.
These mirrors smack back out of the way in tight trails. They fit various size cages with the rubber shims provided. They extend out an additional 2” for extended view. The convex mirror give a good view up, down and to the sides.
These will fit just about all round UTV cages. They will not fit the Polaris Pro-Fit cage (non-round) used on some Rangers and Generals.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13155-5-1/2" Round(pair)Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RZR® 4|RZR® 570|RZR® 900|RZR® 900-4|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |RZR® S 1000|SPORTSMAN® ACE™|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Pioneer 500|Gator|Mule™|Teryx®|Mule PRO-FX/FXT|Teryx4™|RTV
Fits: Polaris RZR 570, RZR 800, RZR 900, RZR XP1K, Polaris Ranger, Polaris General, Yamaha Rhino, John Deere
Gator, Mule 3010, Mule 4010, MULE FX/FXT, Wildcat, Teryx, Honda Pioneer 1000 and any others with a 1-3/4" or 1-7/8" Round cage.
Will not fit Ranger XP900, and RZR 170 Youth.
Wide angle allows for Panoramic View.
13” Wide x 3-1/2” High.
Polycarbonate (plastic) mirror will not shatter.
Ball jointed for infinite adjustment.
Installs in minutes with hardware provided.
Never turn your head to look for the rider behind you. This extra 13” wide panoramic mirror may be the best accessory you every buy. Made from hard coated polycarbonate so that it will not shatter like glass.
Item #: 12533 - (1-3/4") - (1-7/8")Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RZR®|RZR® 4|RZR® 570|RZR® 900|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |Wildcat|Wildcat Sport|Wildcat Trail|Gator|Mule™|Teryx®|Mule PRO-FX/FXT|Teryx4™|Rhino
Full-Size Polaris Ranger Bed Cover/Tonneau Cover
EMP # 13460
Fits: Polaris Full-Size Ranger W/Pro-Fit Cages (60” wide on top of the cage, non-round tube)
Including:
•
2017 Ranger XP1000
•
2013-18 Ranger XP900
•
2015 Full-Size 570
•
2016 Ranger XP570
•
2016-17 Ranger Diesel
•
2013-15 Ranger XP900 Crew
•
2016-18 Ranger Crew 570-6
•
2016-18 Ranger Crew XP900-6
•
2017 Ranger Crew XP1000
(60" Wide Bed, the Mid-Size Ranger has a 55" wide bed this is for the 60" wide bed. If you have a Mid-Size Ranger see P/N: 13360)
Molded from Plastic.
Tool less removal and installation.
16-1/2" high under cover, higher than the stock bed.
Flip back opening allows for easy access.
Keeps the dust, mud and rain off your cargo.
Water Resistant.
Made In Cleveland, Ohio.
Keep your cargo clean and dry with this stylish plastic bed cover. The rear section is hinged and folds forward on the front to allow easy access with and without the tailgate open. It attaches to your stock bed with rubber expansion plugs that go into the holes on the top of the stock bed. Easy Tool- Less removal makes taking it on an off very easy and fast. The front section is about 4” higher than the stock bed allowing clearance for a full size cooler like the one pictured with space left over for other cargo too.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: FULL-SIZE 13460Extreme Metal Products, LLCRANGER® - Mid Size|Polaris|UTV Parts & Accessories
Fits: Polaris Mid-Size/2-Seat Ranger W/Pro-Fit Cages (50” wide on top of the cage, non-round tube)
•
2015 Mid-Size ETX
•
2015 Mid-Size 570
•
2016 2-Seat 570
•
2015-20, EV & EV LI-ION (Electric)
•
2016-21, 2-Seat 500
•
2016-21, 2-Seat 570
•
2017-18, Ranger Crew 570-4
Protect your expensive CV Boots and A-arms with these guards.
Made from 1/8" thick 5052 Aircraft Grade Aluminum.
Designed and formed to ensure a perfect fit every time.
Mounts to your A-arms using clamps provided and factory bolts.
Includes: Front and Rear Guards.
Made In Cleveland, Ohio.
If you need these for older Mid-Size Rangers, see our P/N 10727.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 12726Extreme Metal Products, LLCRANGER® - Mid Size
2015-21 Mid-Size Polaris Ranger Top- Aluminum (fits: PRO-FIT Cage) New
2015-18 Polaris Mid-Size/2-Seat Ranger Aluminum Top
Fits: Polaris Mid-Size/2-Seat Ranger W/Pro-Fit Cages (50”-51`" wide on top of the cage, non-round tube)
Including:
2015 Mid-Size ETX
2015 Mid-Size 570
2016 2-Seat 570
2015-21, EV & EV LI-ION (Electric)
2016-21, 2-Seat 500
2016-21, 2-Seat 570
(will not fit the Full-Size Ranger 570)
(If you have a Full-Size Ranger with a PRO-FIT Cage see #12044)
Bolts to your cage in minutes.
Much lighter than similar steel tops.
Made from light Aircraft Grade Aluminum nearly 1/8" Thick (.100").
Laser cut and CNC formed to ensure a great fit.
Gaskets and foam seal between the top and cage.
Powder Coated Texture Black for superior protection.
Will work with factory doors, windshields, and cab back.
Formed gutter on the front diverts water to the sides.
Includes: Mounting hardware and instructions.
Made In Cleveland, Ohio.
Now, you have an aluminum top to go with the factory doors, windshield, and cab back, or an EMP Windshield (#12711) and Cab Back (#12712). Made from nearly 1/8” thick aluminum, then powder coated, making it very durable and stylish.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 12736Extreme Metal Products, LLCRANGER® - Mid Size
Fits: Polaris Mid-Size/2-Seat Ranger W/Pro-Fit Cages (50” wide on top of the cage, non-round tube)
Including:
2015 Mid-Size ETX
2015 Mid-Size 570
2016 2-Seat 570
2015-20, EV & EV LI-ION (Electric)
2016-20, 2-Seat 500
2016-20, 2-Seat 570
2017-20, Ranger Crew 570-4
(will not fit the Full-Size Ranger 570)
NOTE: because they added a side bar on the 2017 models you will have to drill a hole to mount the clamp. This can be drilled with a standard 1/4' drill bit in about two minutes. Our next production run will have the additional holes added or moved (12/21/16).
Hard Coated Polycarbonate (Both Sides)
Can be removed in minutes without any tools.
3/16” Thick.
Includes: All mounting hardware and brackets.
Made in the USA.
Enclose the back of your Ranger with this Hard Coat Polycarbonate cab back. Keep the dust and rain off your back. It attaches with the brackets and thumb screws provided. You can easily remove it in a couple minutes without any tools by just removing the thumbscrews.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
It is pictured the with the EMP Aluminum top P/N 12736 and the EMP hard coated windshield P/N: 12711.
Item #: 12712Extreme Metal Products, LLCRANGER® - Mid Size
2015-21 Mid-Size/2-Seat Polaris Ranger Hard Coated WindshieldNew
2015-20 Mid-Size Polaris Ranger Hard Coat Windshield
Fits: 2015-21 Mid-Size 500 and 570 and 2015-18 Ranger EV (with PRO-FIT cage)
If you have a Full-Size Ranger 570 or XP900 see our P/N: 11898.
Made From 3/16" thick Hard Coated (Polycarbonate, not cheap acrylic like others on the market).
Removes in a few minutes without any tools using our custom thumbscrews.
HARD COATED on Both Sides.
DOT Rated with the stamp etched in the bottom corner.
Rubber gasket seals around the windshield.
Made in Cleveland Ohio.
Made from Hard Coated Polycarbonate, so it is much more scratch resistant than others, and will hold up well to standard use. Polycarbonate is virtually unbreakable. Made to contour to the cage on the Mid-Size Ranger, ensuring a great fit. Attaches with custom fabricated brackets with thumbscrews, so that you can easily remove your windshield without any tools. Gasketed on all sides.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 12711Extreme Metal Products, LLCRANGER® - Mid Size
Fits: 2015-21 Mid-Size 500 and 570 and 2015-21 Ranger EV (with PRO-FIT cage). If you are not sure if you have the full size or Mid-Size/2-Seat Ranger see the last picture so you can confirm your fitment.
Removable vents along the bottom to help prevent the vacuum created with most other full windshields.
Laminated safety glass.
Powder coated metal frame.
Includes (1) 16" hand operated wiper (wipes driver's side only)
Optional Electric Wiper/Washer available.
Tool-Less Removal.
DOT Rated and etched into the glass.
Metal frame and glass made in the USA.
Laser cut EMP logo plate included.
Ships UPS or Fed Ex to your door.
This is a great windshield for your Mid-Size/2-Seat Ranger. The glass is laminated safety glass, the same as many automotive windshields. The powder coated metal frame is made from 14 gauge Galvanealed steel. The removable vents let is just enough airflow to help prevent some vacuum while keeping the wind off of you. The DOT rating is etched into the glass. The hand operated driver's side wiper comes in handy on rainy days although we do offer an optional Electric Washer/Wiper.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions. Items with free shipping that are returned will have the original shipping costs plus any restocking fees deducted from the refund. Shipping costs on this item range from $50-$60.00 to the lower 48 states. Dealer orders of 5 or more will be shipped on a skid and fright added after discount is applied.
Item #: 14268Extreme Metal Products, LLCRANGER® - Mid Size|Polaris|UTV Parts & Accessories
The Viper Elite 3500 lb. winch is the top of the line design with whisper quiet, metal gears, easy to use synthetic cable, and the ultra flexible wireless remote switch - along with all the other upgrades.
Will work with EMP UTV Winch Mounts.
VIPER Elite and Max, and Midnight Series ATV/UTV Winches purchased after 10/01/2013.
MotoAlliance warrants to the Original Purchaser that (a) the mechanical components of a VIPER Elite, Max and Midnight Series winch will be free of defects in material and workmanship for the lifetime of the winch, and (b) the electrical components will be free of defects in material and workmanship for a period of one (1) year from the original date of purchase. This warranty applies only to the original purchaser of the winch.
• Limited Lifetime Warranty for Selected Mechanical Components
• Limited One (1) Year Warranty for Electrical Components
• Six (6) Month Warranty on all Exterior Components and Components not covered above
Item #: WSM13354282Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® 4|RZR® 570|RZR® 900|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |SPORTSMAN® ACE™|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Big Red|Mule™|Teryx®|Teryx4™|RTV|Rhino|Viking
Will ship with BLUE rope unless you specify a different color when checking out.
Fully Sealed.
Mechanical and Dynamic Braking Rocker Handlebar Switch.
Aluminum Fairlead.
4 Ton Snatch Block.
Waterproof Winch Cover.
Rubber Line Stripper.
Water Proof Switches.
Stainless Steel Hardware.
1 Year Manufacturer Warranty (1 year warranty on rope).
Physical Winch Dimensions 13-1/2 x 4 -1/2 x 4-1/2.
Will fit all EMP UTV Winch Mounts.
VIPER Elite and Max, and Midnight Series ATV/UTV Winches purchased after 10/01/2013.
MotoAlliance warrants to the Original Purchaser that (a) the mechanical components of a VIPER Elite, Max and Midnight Series winch will be free of defects in material and workmanship for the lifetime of the winch, and (b) the electrical components will be free of defects in material and workmanship for a period of one (1) year from the original date of purchase. This warranty applies only to the original purchaser of the winch.
• Limited Lifetime Warranty for Selected Mechanical Components
• Limited One (1) Year Warranty for Electrical Components
• Six (6) Month Warranty on all Exterior Components and Components not covered above
Copy and paste this link for a waterproof demonstration
Cooter Brown Stereo Pod with Speakers and Marine Cover (No Stereo)
We also offer it with a Stereo, see #10593-SD and #10593-bluetooth.
Dimensions: 18 (L) x 9 (W) x 5 (H)
Pictured on a RZR.
This is an easy way to add a stereo to your UTV, Tractor, Skid steer or Golf Cart.
You get to choose and supply your own Stereo (fits standard Automotive stereos that require a 7-1/2 x 2-3/8 cut out).
The molded enclosure comes with 6-1/2" 50 Watt Marine Speakers and a Marine faceplate. You will need to supply the stereo.
This will fit many UTV tops, please check dimensions above before ordering.
Item #: 10593-NO STEREOExtreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® "Cooter Brown" Product Line|RZR® 4|RZR® 570|RZR® 900|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Gator|Mule™|Teryx®|RTV|Rhino|Viking|Tractor & Compact Trackhoe
P/N: 10593-Bluetooth (we do offer this product for less without Bluetooth, see P/N 10593-SD)
Dimensions: 18 (L) x 9 (W) x 5 (H)
Includes: Stereo with Bluetooth and USB Port, (2) Marine Speakers, Antenna, Molded Enclosure, Flip up Marine Cover and wiring.
Product Highlights:
Dual AM/FM Mechless MP3/WMA Bluetooth/USB 3.5mm inputs
Mechless with Bluetooth
50 X 4 watts
Front panel 3.5mm aux in
Front panel USB
1 RCA pre amp output
Detachable face
The Speakers are a 6-1/2" Water resistant Marine Design with 40 Watt Peak Power.
Watch this video for mounting reference only. It is similar but with a Sony stereo that is no longer available.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 10593-BluetoothExtreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® "Cooter Brown" Product Line|RZR® 4|RZR® 570|RZR® 900|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Gator|Mule™|Teryx®|RTV|Rhino|Viking|Tractor & Compact Trackhoe
For your EMP Bumper, as well as other TEXTURE BLACK powder coated parts; Please refer to the number listed below.
Can be used to touch up the powder coat on the following part numbers: 8398, 10286, 10436, 10472, 10595, 10604, 10732, 10835, 10963, 10990, 11079, 11097, 11286, 11307-10436, 11307-11079, 11711, 11899, 11958, 12125, 12310, 12316, 12354, 12366, 12375, 12424, 12487, 12493, 12494, 12564-10436, 12629, 12652, 12645-12375, 13096.
Ships via standard ground delivery.
12 oz. Spray can.
Item #: BLK-TXTExtreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® "Cooter Brown" Product Line|RZR® 170|RZR® 4|RZR® 570|RZR® 900|RZR® 900-4|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |RZR® S 1000|SPORTSMAN® ACE™
Hand Operated UTV Wiper for Hard Coated Poly Windshields OnlyNew0855135005112
Polaris RZR/UTV Hand Operated Wiper
Choose Size from drop down:
P/N: 12841
12" Blade
15" from the center for the handle to the end of the wiper
Mounts to Hard Coated Polycarbonate Windshields
You must drill a 1/2" hole in your windshield to mount it.
OR
P/N: 13180
16" Blade
18" from the center for the handle to the end of the wiper
Mounts to Hard Coated Polycarbonate Windshields
You must drill a 1/2" hole in your windshield to mount it.
This is a universal UTV wiper. We give you all the dimensions needed to verify fitment for yourself. It has been mounted on the following vehicles:
Kawasaki MULE
Kawasaki TERYX
Polaris Ranger
Polaris RZR
KUBOTA RTV
John Deere Gator
CASE
Kymco UXV
Arctic Cat Wildcat
Can-Am Maverick
Can-Am Commander
Yamaha Rhino
Yamaha Viking
This item is eligible for free ground shipping via USPS only. If you chose to ship via another carrier our website will figure shipping for you. Shipping is included to the lower 48 states only.
Item #: Hand WiperExtreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® 4|RZR® 570|RZR® 900|RZR® 900-4|RZR® XP1000 (XP1K)|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Gator|Mule™|Teryx®|Teryx4™|RTV|Rhino|Viking
Light Bracket for Polaris Ranger PRO-FIT style cageNew
This item is eligible for free shipping to the USA.
P/N: EMP-12878
If you want to mount a 50” light bar on your Ranger see P/N: 13552.
Polaris Ranger/General Pro Fit Cage Light Bracket set.
2013-2019 Polaris Ranger XP900 w/ Pro Fit Cage
2017-20 Ranger XP1000 w/Pro-Fit Cage
2015-2018 Polaris Ranger Full –Size 570 w/ Pro Fit Cage
2015-2020 Mid-Size Rangers w/ Pro Fit Cage.
2016-20 General w/Pro-Fit Cage.
2018-2020 Can-Am Defender
Laser Cut and CNC formed.
Sold as a set of two brackets.
Powder Coated-Black.
No drilling or cutting required.
Made In Cleveland Ohio.
You can bolt these right to your Pro Fit cage. The holes on the brackets for the lights is .375” diameter. You can mount these anywhere vertically on your cage sides. NOTE: the Pro Fit cage is the non-round cage designed for Polaris cab accessories.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 12878Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900
Thermoformed for Thick 3/16” Thick Polyethylene (before forming)
Made in Cleveland Ohio.
Thermoformed from 3/16” thick Polyethylene making it very strong and durable. One-Piece design does not have any seams to leak. Attaches to your ROPS with metal rubber coated straps. Works with most windshields including EMP P/N: 10725 Laminated Glass Windshield and P/N: 10575 Polycarbonate windshields.
If you have a 2010-2014 Mid-Size Ranger this will not fit. Your motor is under your seat.
Made with Polyethylene.
All Three bins included.
Center bin is up to 16” deep.
Utilizes the empty space under your seat.
Installs in minutes.
Ships to your door via Fed Ex or UPS.
Need a place to store your tools and gear? This is what you have been looking for. This three bin set will provide you with much needed dry storage. The center bin is up to 16” deep and allows enough clearance on the battery side for full size battery (just in case you ever want to add a full size battery). The side bins are great for tools, gloves, ammunition and other smaller items.
Need a top, windshield or cab back? See EMP P/N’s 12711, 13020 and 12712.
Item #: 13078Extreme Metal Products, LLCRANGER® - Mid Size
Mid-Size Ranger & EV Ranger Hard Top with LED Dome LightNew
Polaris Mid-Size Ranger Hard Top with LED Dome Light
Fits: 2010-14 Ranger 400, 2011-14 Ranger 500, 2013-14 800, 2014 570 & EV Ranger (will not fit Full-Size Rangers)
CNC cut and formed for a great fit.
Powder coated for superior protection.
Includes: Mounting hardware and instructions.
Ships regular ground service to your door.
LED dome light uses (3) AAA batteries that are included.
Made from 16 gauge steel and powder coated gloss black to match the cage. The sides are folded over twice creating a 1/8" angle around the outside making it very it very durable. It mounts with EMP Quick Connect Clamps using (6) bolts, so you can easily remove the top in the future. The clamps will remain on the cage so you can easily mount it again. Will work with most windshields, including the EMP Full Windshield #10575.
Item #: 10569Extreme Metal Products, LLCRANGER® - Mid Size
Hemmed bends insure smooth edges on the metal frame.
Hand operated wiper included.
Mounts with quick connect clamps.
Pictured with EMP Hard Top #10569.
Now, you can have a laminated safety glass windshield for your Ranger 400. The metal frame is made from 16 gauge steel and powder coated for superior protection. It mounts with our patent pending quick connect clamps which allow you to remove the windshield frame without any tools. Simply remove the thumbscrews and the clamps remain on your cage so you can easily install again. The windshield is now in two parts so it can ship UPS to your door.
THIS IS A KIT WITHOUT THE LAMINATED GLASS. SINCE THE DEMAND FOR THIS ITEM HAS SLOWED EMP DOES NOT OFFER IT WITH GLASS ANYMORE. YOU CAN TAKE IT TO YOUR LOCAL GLASS SHOP AND THEY CAN CUT THE GLASS USING THE FRAME AS A TEMPLATE. GLASS PRICES WILL VARY WE HAVE SEEN PRICES BETWEEN $30 AND $75 PER THIS SIZE CUSTOM CUT LAMINATED GLASS.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 10725Extreme Metal Products, LLCRANGER® - Mid Size
Fits: 2011-21 Mid-Size/2-seat Rangers Only (not full size)
P/N: 10864-11218-11226-12442-12441
Fabricated from A36 American steel (not soft Chinese steel).
All parts are laser cut to ensure a perfect fit, then MIG welded.
Powder coated for superior protection
Plow blade is 20" high and 72" wide.
Plow frame is made from 1/4" and 3/8" thick steel.
Attaches in less than a minute with two hitch pins.
Plow raises and lowers with your winch.
Includes: Can-Am Maverick mounting plate.
Includes plow shoes.
EMP now offers rubber blades as an option, but please call to order.
Plow blades are 20" high (higher than others) and 72" wide.
The mold boards are made from 14 gauge steel and have 1/4" thick laser cut braces. They feature manual angle adjustment (left, right, center positions) or an optional electric over hydraulic power angle (sold separately, see Power Angle). Our wear blade is made from AR plate (Abrasion Resistant Steel) and is 4" high. Others on the market are much thinner and shorter, wearing out much sooner.
EMP plow frames are laser cut from 1/4" and 3/8" thick steel. The parts fabricated with the tab and slot method. In other words, the parts fit together like a puzzle before welding. This ensures a perfect fit every time.
Our plow mounting system mounts to the front and underside of the UTV with the supplied hardware. The mount can easily be removed at the end of the season with six bolts. The plow attaches in less than a minute with the supplied hitch pins.
This assembly does not include a winch mount. If you need one, please see #10573.
(Residential Consumer use only. Do not “Ram” plow or use vehicle speeds in excess of 5 mph.)
Shipping: This product ships in multiple boxes, which the website cannot figure into the shipping charge. Therefore, a $50 handling fee will be added to all plow orders to help cover the shipping on the multiple boxes you will receive.
Price: $1,219.99
Mid-Size Ranger Crew Hard TopNew
Mid-Size Ranger Crew Hard Top
Fits: 2011-2014 Ranger Mid-Size Crew
16 gauge American Steel.
No drilling or cutting required.
Powder coated black for superior protection.
Includes: Mounting hardware and instructions.
Ships regular ground delivery to your door, in two pieces with a gasket down the center.
Made from 16 gauge steel and powder coated. The sides are hemmed over twice, creating a strong 1/8" angle around the outside edges. Can be used with most aftermarket windshields and the EMP cab back. Protects the driver and all passengers from rain, snow, etc.
Item #: 11640Extreme Metal Products, LLCRANGER® - Mid Size
Powder coated for superior protection - Texture black.
Made from 11 gauge and 7 gauge American steel.
Laser cut and CNC formed for a great fit.
3 x 4.88 inch bolt pattern for winch up to 3500 lb.
Add style and function to your Ranger with the front bumper from EMP. Replaces your stock front bumper. Allows you to mount a winch on top, up high and out of the mud and water. Designed in CAD, laser cut, and CNC formed to ensure a perfect fit.
If you do not use a winch you can mount lights in the pre-cut holes where the winch would go. If you would like to mount off road lights on the stinger bar you can use our light brackets #10599.
Item #: 10732Extreme Metal Products, LLCRANGER® - Mid Size
Made from 11 gauge and 3/16" Thick American steel.
Mounting brackets are made from .188" thick steel.
Powder coated black for superior protection.
Installs in minutes, and does not require welding or cutting.
All welds are ground smooth.
Dumps with the bed.
Made in Cleveland, Ohio.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions. Items with free shipping that are returned will have the original shipping costs plus any restocking fees deducted from the refund. Shipping costs on this item range from $25-$35.00 to the lower 48 states.
Item #: 10604Extreme Metal Products, LLCRANGER® - Mid Size
Now you can mount a multi-mount winch plate and other accessories to the front of your Ranger & EV. Mounts inside your front bumper where the factory winch would mount.
Item #: 10827Extreme Metal Products, LLCRANGER® - Mid Size
Mid-Size Ranger Polyethylene Top (Fits: PRO-FIT Cage, 50" wide)New855135005303
Mid-Size Polaris Ranger Polyethylene Top (fits: PRO-FIT Cage, about 50” wide across the top of the cage)
Fits: Polaris Mid-Size/2-Seat Ranger W/Pro-Fit Cages (about 50” wide on top of the cage, non-round tube. If yours is about 54" wide you have Full-Size Ranger, see P/N 13502)
Including:
2015 Mid-Size ETX
2015 Mid-Size 570
2016 2-Seat 570
2015-20 EV & EV LI-ION (Electric)
2016-21, 2-Seat 500
2016-21, 2-Seat 570
(will not fit the Full-Size Ranger 570)
If you have a 2010-2014 Mid-Size Ranger see P/N 12507.
Made from thick .188” Polyethylene.
Protects from the rain and sun.
Front and rear gutters divert water to the sides.
Top Gutters divert water to the rear gutter.
Will work with most doors and windshields.
No Drilling required.
Installs in minutes.
Drop down area in the front makes a great place to mount up to a 20" Light bar.
Ships to your door via Fed Ex or UPS.
Add protection and comfort with this stylish and durable top. Its lightweight, durable and provides protection from the rain and sun. It will work with most aftermarket cab components. Installs in minutes without any cutting or drilling.
Need a windshield or cab back? See EMP P/N’s 12711 and 12712.
Item #: 13020Extreme Metal Products, LLCRANGER® - Mid Size
Mid-Size Ranger Windshield & Cab Back Combo New0855135005631
2015-21 Mid-Size Polaris Ranger Hard Coated Windshield & Cab Back Combo
Fits: Polaris Mid-Size/2-Seat Ranger W/Pro-Fit Cages (50” wide on top of the cage, non-round tube)
Including:
2015 Mid-Size ETX
2015 Mid-Size 570
2016 2-Seat 570
2015-20, EV & EV LI-ION (Electric)
2016-20, 2-Seat 500
2016-20, 2-Seat 570
2017-20, Ranger Crew 570-4
(will not fit the Full-Size Ranger 570)
If you have a Full-Size Ranger 570 or XP900 see our P/N: 11898-11893 Combo.
Windshield Features:
Made From 3/16" thick Hard Coated (Polycarbonate, not cheap acrylic like others on the market).
Removes in a few minutes without any tools using our custom thumbscrews.
HARD COATED on Both Sides.
DOT Rated with the stamp etched in the bottom corner.
Rubber gasket seals around the windshield.
Made in Cleveland Ohio.
Made from Hard Coated Polycarbonate, so it is much more scratch resistant than others, and will hold up well to standard use. Polycarbonate is virtually unbreakable. Made to contour to the cage on the Mid-Size Ranger, ensuring a great fit. Attaches with custom fabricated brackets with thumbscrews, so that you can easily remove your windshield without any tools. Gasketed on all sides.
Cab Back/Dust Stopper Features:
Hard Coated Polycarbonate (Both Sides)
Can be removed in minutes without any tools.
3/16” Thick.
Includes: All mounting hardware and brackets.
Made in the USA.
Enclose the back of your Ranger with this Hard Coat Polycarbonate cab back. Keep the dust and rain off your back. It attaches with the brackets and thumb screws provided. You can easily remove it in a couple minutes without any tools by just removing the thumbscrews.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 12711-12712Extreme Metal Products, LLCRANGER® - Mid Size|Polaris|UTV Parts & Accessories
If you have a 2010-2014 Mid-Size Ranger with 1-3/4" diameter cage this will not fit.
Laser Cut and CNC formed faceplate.
Mounts in stock dash opening.
Face plate is Powder Coated-Texture Black.
Includes: Factory Style Plastic Fasteners.
Ships from Cleveland, Ohio.
Stereo Features:
Bluetooth Audio Streaming
4 x 50 watts
Solid aluminum chassis
Aux-in
Portable-media ready
USB input
ASTM117 salt fog
IP66 waterproof face
6" (L) x 4" (W) x 2 1/2" (D)
Now, you can mount a stereo in the dash of Mid-Size/2-Seat Ranger. This kit includes the stereo, mounting plate, and plastic factory style fasteners. It is everything your need to mount the stereo in the dash but no additional wiring is included. In other words, you have to wire it up to your speakers of choice as well as your powder source that is located under the hood panel. The panel requires drilling (4) 5/16" diameter holes for the plastic factory style rivets.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13088Extreme Metal Products, LLCRANGER® - Mid Size|Featured Products
Mid-Size/2 Seat Polaris Ranger Bed Cover/Tonneau Cover
EMP # 13360
Fits: 2010-21 Mid-Size/2 Seat Ranger
(50" Wide Bed, the full size has a 60" wide bed this is for the 50" wide bed)
Molded from Plastic.
Tool less removal and installation.
4” Higher than stock bed.
Flip back opening allows for easy access.
Keeps the dust, mud and rain off your cargo.
Water Resistant.
Made In Cleveland, Ohio.
Keep your cargo clean and dry with this stylish plastic bed cover. The rear section is hinged and folds forward on the front to allow easy access with and without the tailgate open. It attaches to your stock bed with rubber expansion plugs that go into the holes on the top of the stock bed. Easy Tool- Less removal makes taking it on an off very easy and fast. The front section is about 4” higher than the stock bed allowing clearance for a full size cooler like the one pictured with space left over for other cargo too.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13360Extreme Metal Products, LLCRANGER® - Mid Size|Polaris|UTV Parts & Accessories
Polaris Mid-Size/2 Seat Ranger Flip Up Windshield (Flip Out) (fits: 50" wide with PRO-FIT cage-measure the top of the cage)
PN: EMP-13359-MID-SIZE (50" Wide)
Fits: Polaris Mid-Size/2-Seat Ranger W/PRO-FIT Cages (50” wide on top of the cage, non-round tube)
Including:
2015 Mid-Size ETX
2015 Mid-Size 570
2016 2-Seat 570
2015-21, EV & EV LI-ION (Electric)
2016-21. 2-Seat 500
2016-21, 2-Seat 570
2017-21, Ranger Crew 570-4
(will not fit the Full-Size Ranger 570)
If want a less expensive polycarbonate windshield see P/N:12711. If you have a Full size Ranger with a 60" wide cage (measure the top of the cage) see P/N: 13395.
Made from Hard Coated Polycarbonate.
Virtually un-breakeable under normal use (unlike cheaper acrylic competitors use).
Adjusts to three position; Flipped Up/Open, Closed, and Vented.
Can easily be removed without any tools on warm days.
Installs in about an hour or less.
Works with factory top and doors (pictured with EMP Top P/N 13020)
Made In Cleveland Ohio.
Now, you can have the best of all windshields. This windshield adjusts to three different positions; Full open when driving less than 5 MPH, Fully Closed on cold days or Vented on hot days. It can even easily be removed without any tools if desired. Works with Factory Top and Doors but pictured with EMP Top P/N: 13020
NOTE: When installing you do have to drill to ¼” diameter holes in the dash for the latching mechanism using the supplied template.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13359-MID-SIZE (50" Wide)Extreme Metal Products, LLCRANGER® - Mid Size|Polaris|UTV Parts & Accessories
This is probably one of the best center rearview mirrors on the market. It is 13” wide and panoramic so it gives a great rear view. It is made from polycarbonate so will not shatter. It comes with rubber bushings for the different size cages.
This item will fit just about every UTV made with a round cage (see sizes listed above). If you do not have the clearance for the collar maybe do to a top then see our P/N: 12533. It has the same mirror just mounts with thin straps for clearance above.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13281Extreme Metal Products, LLCGENERAL™ 1000 EPS|RANGER® - Full Size|RANGER® - Mid Size|RZR®|RZR® 4|RZR® 570|RZR® 900|RZR® 900-4|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |RZR® S 1000|SPORTSMAN® ACE™|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Pioneer 500|Gator|Mule™|Teryx®|Mule PRO-FX/FXT|Teryx4™|RTV|Rhino|Viking|Wolverine|YXZ1000R|Polaris|Arctic Cat|Can-Am|Honda|John Deere|Kawasaki|Kubota|Yamaha|UTV Parts & Accessories
Polaris Ranger and General Light Duty Tie-Down PlungersNew0855135005440
Polaris Ranger and Polaris General Light Duty Tie Downs
Fits: all year and models Rangers and Generals
Great for securing light items such as Chainsaws.
Fits: Ranger and General Bed Holes (about 1-1/2" Diameter).
Set of Four
Simple and Effective products from Extreme Metal Products, LLC
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13156-10Extreme Metal Products, LLCGENERAL™ 1000 EPS|RANGER® XP1000|RANGER® - Full Size|RANGER® - Mid Size|Polaris|UTV Parts & Accessories
2009-2014 Full Sized Ranger models (not 900 models)
2010-2014 Full Sized Ranger Crew models (not 900 models
2010-2014 Mid Size 400/500 (without EPS)
2011-2014 Mid Size 570 (without EPS)
2010-2014 Mid Size 500/800 Ranger Crew
Please Note: will NOT fit the Ranger 570 midsized models with Power Steering
Please Note: will NOT fit Ranger XP 900 models
Please Note: the defrost vents WILL interfere with the Polaris After Market Full Steel Cab Enclosure
Please Note: 570s will not achieve full heat unless you are operating at 3000-4000 rpms.
Ranger - HT_CP-404
2013-2017 Ranger XP 900 models
Two 360° adjustable airflow louvers
Adjustable temperature setting
Defrost components are included
Runs up to 14,600 BTU / 135CFM
Three speed fan control
High-grade radiator hose - rated -40° to 120° Celsius
Patented Unicoil for professional installation
High performance alloy Y connector
Runs up to 14,600 BTU / 135 CFM
Draws 4.5 amps on a 12V battery
Includes all necessary hardware and installation instructions
Injection molded housing eliminates sharp corners and protects knees
Dimensions: 5" (H) x 12" (W) X 13" (D)
Includes 3 Year Warranty
Cab heaters are custom made with laser-cut, powder coating brackets designed to fit your Polaris Full Size Ranger. These heaters make it much more enjoyable to use your UTV comfortably when the temperature outside is not cooperating.
Pictures are provided for reference only. EMP reserves the right to make product changes or improvements at any time.
Item #: RGFS-CP-HTRExtreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900
Polaris Ranger Folding Mirror set for the PRO-FIT Cage (non-round cage)New
Polaris Ranger XP900, XP1000 and Ranger 570 Folding Mirror Set.
These mirrors fit the Ranger Models that have the PRO-FIT Cages (non-round tube).
Fits: 2013-18 Ranger XP900, 2017-21 Ranger XP1000 (if you have a 2018 Ranger XP1000 see P/N: 13609 from the drop down menu), 2015 Full Size Ranger 570, and 2015 Mid-Size 570, 2016-21 Ranger 2 Seat.
ABS housings.
Sold as a set of two.
Ball jointed for adjustment.
Fold in so they are out of the way on tighter trails.
Made specifically for the Ranger with PRO-FIT Cages.
Mounting Brackets included.
Will not work with factory doors.
Mounts to your Ranger in minutes using your stock hardware.
The 2018 Polaris Ranger XP1000 takes a different mounting bracket. See the pictures in the drop down menu when adding this item to your cart. The 2018 Ranger XP1000 requires P/N 13609 and the other models require P/N 11969.
Replacement mirrors can be ordered from the drop down window. In other words, if you break one mirror you can buy a replacement without buying the whole mirror set.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 11969 or 13609Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900
Polaris Ranger Smack Back Mirrors for PRO-FIT Cages Set (pick your mirror size)New
Polaris Ranger Smack Back Mirror Set (Fits: PRO-FIT Cages only)
P/N: 13483-13156 Mirror Set (pick your mirror size from the drop down)
Fits: Polaris Full-Size Ranger W/Pro-Fit Cages (60” wide on top of the cage, non-round tube)
•
2017-18 Ranger XP1000
•
2013-17 Ranger XP900
•
2015 Full-Size 570
•
2016 Ranger XP570
•
2016-17 Ranger Diesel
•
2013-15 Ranger XP900 Crew
•
2016 Ranger Crew 570-6
•
2016 Ranger Crew XP900-6
•
2017 Ranger Crew XP1000
•
2017 Ranger Crew XP900
Fits: Polaris Mid-Size/2-Seat Ranger W/Pro-Fit Cages (50” wide on top of the cage, non-round tube)
•
2015 Mid-Size ETX
•
2015 Mid-Size 570
•
2016 2-Seat 570
•
2015-18 EV & EV LI-ION (Electric)
•
2016-18, 2-Seat 500
•
2016, 2-Seat 570
•
2017-18, Ranger Crew 570-4
Sold as set of two (Drivers and Passenger Side).
Pick either 5-1/2 Convex or 8" x 4" Rectangle Mirrors (pick from the drop down option)
Smack back feature allows them to fold out of the way on impact.
Extendable
Mount to stock side net bolts.
Will work with factory doors although the view is somewhat obstructed with the doors installed.
These Smack Back mirrors are great for tight woods riding or simply loading your Ranger into an enclosed trailer. The Smack Back (folding) feature will give clearance upon light impact. It bolts to the stock torx bolts that hold the side nets in place.
These will fit Rangers with the PRO-FIT Cages.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13483-13155Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |Polaris|UTV Parts & Accessories
Fits: Polaris Ranger and RZR, Yamaha Rhino, John Deere Gator,
and Kawasaki Mule 3000/3010 and 4000/4010 FRONT CAGE RAILS ONLY.
Fits: 1-3/4" diameter tube.
Easily attach windshields and other accessories to your UTV with these Patent Pending "Quick Connect Clamps".
Includes: Thumbscrews.
Made in the U.S.A.
After you install the clamps on your cage you can easily remove your windshield without any tools. Simply, remove the thumbscrews and the clamps remain on your cage.
If you have any model besides the ones listed above, please measure your tube O.D. before ordering.
Item #: 9881Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® 4|RZR® 570|RZR® 900|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |SPORTSMAN® ACE™|Wildcat|Gator|Mule™|Rhino
Ranger Polyethylene Top (Fits: both 50" and 60" wide models with the Pro-Fit Cage)New
Ranger Polyethylene Top (Fits: both 50" and 60" wide models with the Pro-Fit Cage.
Fits: 2013-18 Ranger XP900, 2017-18 Ranger XP1000, 2015 Full-Size 570, 2016-18 Full-Size 570 Ranger with the Pro-Fit Cage and 2015-18 Mid-Size Ranger (NOTE: This will fit the models listed with Pro-Fit Cage. Where it gets tricky is it will not fit the 2016 Full-Size Ranger 570 with round tubing, see P/N 11089). In other words, if you have a 2013-17 50" or 60" wide Ranger with a Pro-Fit Cage this will fit.
Add style and function to your Ranger with this top.
Made from 3/16" Thick Black Polyethylene.
Designed to match the body of a Ranger.
Attaches with hardware provided (no drilling or cutting into your cage).
Ships in two telescoping halves that you stick together with double sided tape provided.
Mounting hardware holds the together after installation.
Ships Regular ground shipping to your door (not oversized).
Made In Cleveland, Ohio.
Item #: 11894Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |Best Sellers
Fits: All models with the PRO-FIT cage (non-round tubing)
Sold as set of two (Driver’s and Passenger’s sides)
Powder Coated Black
Mounts behind the side net brackets using the stock bolts.
Works with and without the factory doors pictured.
Laser Cut and CNC formed to insure a perfect fit.
Made in Cleveland Ohio.
Now, you can easily mount lights to the side of your Ranger PRO-FIT Cage.
Does not include the lights pictured. Only a set of brackets.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13483Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR® 900|Polaris|UTV Parts & Accessories
The Roll-Top Dry Bag is both waterproof and floating. The bag features rugged waterproof rubber with high frequency welded seams and a reinforced roll-top closure. The bag comes with a removable and adjustable carry strap, and the bag is designed to keep your gear dry. This is a great accessory for your UTV or ATV.
Item #: Roll-Top Dry BagExtreme Metal Products, LLCGENERAL™ 1000 EPS|RANGER® XP1000|RANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RS1|RZR®|RZR® "Cooter Brown" Product Line|RZR® 170|RZR® 4|RZR® 570|RZR® 900|RZR® 900-4|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® S 1000|SPORTSMAN® ACE™|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Maverick Trail |Maverick X3|Big Red|Pioneer|Pioneer 500|Gator|Mule™|Teryx®|Mule PRO-FX/FXT|Teryx4™|RTV|Rhino|Viking|Wolverine|YXZ1000R|Polaris|Arctic Cat|Can-Am|Honda|John Deere|Kawasaki|Kubota|Yamaha|UTV Parts & Accessories
Fitment: Fits for Polaris RZR 900 / 1000 and Ranger models with a 44mm wheel bearing and Works on Polaris ATV, UTV, SXS, that have a 44MM wheel bearing. Works on the following bearings:
Front and Rear - RZR XP 1000 - RZR XP 900 -RZR XP 4 900 - RZR XP 4 1000 - RZR 4 900 -RZR 900 - SCRAMBLER 850 - SCRAMBLER XP 850 - SCRAMBLER XP 1000 - SPORTSMAN 500 - SPORTSMAN 550 - SPORTSMAN 850 - SPORTSMAN SP 850 - SPORTSMAN XP 550 -SPORTSMAN XP 1000 - SPORTSMAN X2 550 - SPORTSMAN X2 850
Slim UTV Overhead Stereo Pods with stereo and wiringNew
Water Proof Stereo and Overhead Stereo Pod
Fits: RZR and many other UTV’s.
P/N: 12595-MIL
Angled Face allows for greater visibility while seated.
20-3/4” Long x 12” Wide x 4-3/4” Deep
Thermoformed Plastic Housing.
BLUETOOTH
Includes: Universal Housing, Waterproof Stereo, Antenna, and 6’ of power cable.
60 Watt Marine Speakers.
Must be bolted to a hardtop with the four bolts provided.
The Multimedia Receiver features Bluetooth audio technology that lets you stream music wirelessly from your Bluetooth device. This surface-mount receiver is portable-media-ready and feature AM/FM radio, USB input, and aux input x 2 for connecting portable media devices. The receiver has a solid aluminum chassis and IP-66 salt fog rating for durability.
Compatibility Bluetooth
Peak Output Power 45W x 4
Front Inputs Aux, USB
Waterproof IP66
Item #: 12595RANGER® - Full Size|RANGER® - Mid Size|RZR®|RZR® 4|RZR® 570|RZR® 900|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Gator|Mule™|Teryx®|Teryx4™|RTV|Viking
Smack Back Buggy Mirror-Rectangle 8" x 4"New0855135005426
Smack Back Buggy Mirror-Rectangle
13155-Rectangle (8" x 4")
Fits: 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8” and 2” Diameter Cages.
Large Rectangle Shape (8" x 4").
Folds in for tight trails.
Can be mounted on the Passenger side, Drivers side, or use as Center Rear view mirror.
Extends 2" for more visibility.
These mirrors smack back out of the way in tight trails. They fit various size cages with the rubber shims provided. They extend out an additional 2” for extended view. The convex mirror give a good view up, down and to the sides.
These will fit just about all round UTV cages. They will not fit the Polaris Pro-Fit cage (non-round) used on some Rangers and Generals.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13155 -Rectangle 8" x 4"Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RZR® 4|RZR® 570|RZR® 900|RZR® 900-4|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |RZR® S 1000|SPORTSMAN® ACE™|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Maverick X3|Big Red|Pioneer|Pioneer 500|Gator|Mule™|Teryx®|Teryx4™|RTV
Smack Back Buggy Mirror-Round 5-1/2" Diameter ConvexNew0855135005419
Smack Back Buggy Mirror-Round
13155-Round-Single
Fits: 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8” and 2” Diameter Cages.
5-1/2" Round Convex mirrors expands view.
Folds in for tight trails.
Can be mounted on the Passenger or Drivers sides.
Extends 2" for more visibility.
These mirrors smack back out of the way in tight trails. They fit various size cages with the rubber shims provided. They extend out an additional 2” for extended view. The convex mirror give a good view up, down and to the sides.
These will fit just about all round UTV cages. They will not fit the Polaris Pro-Fit cage (non-round) used on some Rangers and Generals.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13155 -5-1/2" RoundExtreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RZR® 4|RZR® 570|RZR® 900|RZR® 900-4|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |RZR® S 1000|SPORTSMAN® ACE™|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Pioneer 500|Gator|Mule™|Teryx®|Mule PRO-FX/FXT|Teryx4™|RTV
HUGE sale from Black Friday through Cyber Monday!!!!! Get them now!!
ALL ALLOY compare to others and save $$$$$$$.
Smack Back Buggy Mirror Set
P/N: 14057
Sold as a set.
Die-Cast Housing (All Alloy-not plastic).
Convex Mirror.
Locks into three positions.
Fits most tubing sizes including; 1-3/4", 1-7/8", 2", Can-Am Profile and the Polaris Profit cages (these are the non-round tubes). Pick a size from the drop down menu. If you do not know your size pick the Universal fit. Also, please put the year and model notes and we will help or call you before shipping to verify size.
Replace-able glass ($15.00).
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
This item is eligible for free shipping on orders to the lower 48 states only. Our terms and conditions apply to this order. See Terms and conditions for return policy. Items with free shipping that are returned will have the original shipping costs plus any restocking fees deducted from the refund. Shipping costs on this item range from $13-$22.00 to the lower 48 states. Dealer orders of 5 or more will not apply for free shipping.
Item #: 14057 (pick a size or universal fit)Extreme Metal Products, LLCGENERAL™ 1000 EPS|RANGER® XP1000|RANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RS1|RZR®|RZR® 4|RZR® 570|RZR® 900|RZR® 900-4|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |RZR® S 1000|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Maverick Sport|Maverick Trail |Maverick X3|Talon|Gator|Mule™|Teryx®|Mule PRO-FX/FXT|Teryx KRX 1000|Teryx4™|RTV|Rhino|Viking|Wolverine|YXZ1000R|Polaris|Arctic Cat|Can-Am|CF Moto|Honda|John Deere|Kawasaki|Kubota|Mahindra|Yamaha|UTV Parts & Accessories
Two-Way Rocker Switch, housing, and mounting bracket.
6 month manufacturer Warranty.
Includes: Wiring Harness.
Chrome Shaft.
Now, you can add a power angle to your EMP snow plow. Easily adjust the angle of your UTV plow without getting out of your seat. The unit features overload protection, so if you hit something hard enough the actuator will give instead of breaking something on the plow or vehicle. Then simply wait two seconds and it will reset itself so you can start plowing again. Over three years of testing has been done on this unit. The Actuator/Cylinder is made in Japan.
Item #: WSM13354331Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® 4|RZR® 570|RZR® 900|Commander|Maverick (XC, DPS, XMR and Max)|Mule™|RTV|Viking
Our full size EX support bars is the ideal product for people who use their pickup truck to load and unload heavy objects. The Tailgate EX Supportâ„¢ secures your tailgate in the open position, allowing you to roll heavy equipment or vehicles into the cargo bed safely.
Pick your year and model from the drop down window on the right.
Provides extra security when the tailgate is open
Prevents weak cables from breaking
Compatible with most pickup trucks
Great for ATVs, UTVs, heavy lawn equipment and motorcycles.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: Tailgat Support -Pick size from drop down menu.Extreme Metal Products, LLCRANGER® - Mid Size|RZR®|RZR® 570|RZR® 900|RZR® S 1000|SPORTSMAN® ACE™|Pioneer 500|RTV|Polaris|Arctic Cat|Can-Am|Honda|John Deere|Kawasaki|Kubota|Yamaha|UTV Parts & Accessories|Featured Products|Snowmobile
Fits the following popular UTVs and probably more too:
Kawasaki MULE 3000/3010/4010 (will not fit the MULE 600/610)
Bob Cat 3400
Yamaha Rhino 450/660/700
Kawasaki Teryx (2008-2012 Only)
Full Size Polaris Ranger 500, XP700, and XP800 (not crew)also 2016 Full-Size 570 (with Round cage)If you have a Ranger with a Pro-Fit cage see P/N 11894.
Mid Size Ranger 400, 500, and 800 (If you have a Mid-Size Ranger with the Pro-Fit cage see P/N 11894)
New Holland Rustler
John Deere Gator 625i and 825i
Many other brands as well.
Add style and function to your UTV with the Cooter Brown Top.
Thermoformed from thick 3/16" Polyethylene, designed to be the toughest top on the market.
Polyethylene is a very tough material that is used to make OEM ATV fenders and many other items, and will not crack like ABS.
Attaches with Rubber Coated Mounting Hardware.
Telescopes to fit different width UTVs.
This top is not considered a part of the oversize 3 category, therefore it is economical to ship standard ground service.
If you have a Ranger with a Pro-Fit cage see our P/N 11894.
Item #: 11089Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|Gator|Mule™|Teryx®|Rhino|Best Sellers
Easily remove your windshield in seconds without tools.
Allows you to remove your windshield so you can trailer your machine.
Designed for UTV / SxS windshields.
Also works great for license plates.
Attach your windshield to your ROPS with this rubber fast strap. Simply wrap around your cage and hook back to the strap itself. Now, one size fits all up to 2" diameter.
Sold to other manufactures in bulk. Call for pricing.
Warning/Caution:
These are designed for attaching windshields and license plate to UTV Roll Cages/ROPS only. Serious injury or death could result if these are used for other purposes. Windshields should be removed when on a trailer over 50 MPH. Serious injury or death could result if not removed at faster speeds.
Item #: 11651Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® "Cooter Brown" Product Line|RZR® 4|RZR® 570|RZR® 900|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |RZR® S 1000|SPORTSMAN® ACE™|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Gator|Mule™|Teryx®|Teryx4™|RTV|Rhino|Viking|Wolverine
