Full-Size Polaris Ranger Bed Cover/Tonneau Cover
EMP # 13460
Fits: Polaris Full-Size Ranger W/Pro-Fit Cages (60” wide on top of the cage, non-round tube)
Including:
•
2017 Ranger XP1000
•
2013-18 Ranger XP900
•
2015 Full-Size 570
•
2016 Ranger XP570
•
2016-17 Ranger Diesel
•
2013-15 Ranger XP900 Crew
•
2016-18 Ranger Crew 570-6
•
2016-18 Ranger Crew XP900-6
•
2017 Ranger Crew XP1000
(60" Wide Bed, the Mid-Size Ranger has a 55" wide bed this is for the 60" wide bed. If you have a Mid-Size Ranger see P/N: 13360)
Molded from Plastic.
Tool less removal and installation.
16-1/2" high under cover, higher than the stock bed.
Flip back opening allows for easy access.
Keeps the dust, mud and rain off your cargo.
Water Resistant.
Made In Cleveland, Ohio.
Keep your cargo clean and dry with this stylish plastic bed cover. The rear section is hinged and folds forward on the front to allow easy access with and without the tailgate open. It attaches to your stock bed with rubber expansion plugs that go into the holes on the top of the stock bed. Easy Tool- Less removal makes taking it on an off very easy and fast. The front section is about 4” higher than the stock bed allowing clearance for a full size cooler like the one pictured with space left over for other cargo too.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: FULL-SIZE 13460Extreme Metal Products, LLCRANGER® - Mid Size|Polaris|UTV Parts & Accessories
The Viper Elite 3500 lb. winch is the top of the line design with whisper quiet, metal gears, easy to use synthetic cable, and the ultra flexible wireless remote switch - along with all the other upgrades.
Will work with EMP UTV Winch Mounts.
VIPER Elite and Max, and Midnight Series ATV/UTV Winches purchased after 10/01/2013.
MotoAlliance warrants to the Original Purchaser that (a) the mechanical components of a VIPER Elite, Max and Midnight Series winch will be free of defects in material and workmanship for the lifetime of the winch, and (b) the electrical components will be free of defects in material and workmanship for a period of one (1) year from the original date of purchase. This warranty applies only to the original purchaser of the winch.
• Limited Lifetime Warranty for Selected Mechanical Components
• Limited One (1) Year Warranty for Electrical Components
• Six (6) Month Warranty on all Exterior Components and Components not covered above
Item #: WSM13354282Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® 4|RZR® 570|RZR® 900|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |SPORTSMAN® ACE™|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Big Red|Mule™|Teryx®|Teryx4™|RTV|Rhino|Viking
Polaris Full-Size Ranger Flip Up Windshield (Flip Out) (fits: 55-1/2" wide with PRO-FIT cage-measure the top of the cage)
PN: EMP-13395-Full-Size. Note: Will not work with the Ride Command option.
Temporary Sale - add to your cart to see the price!
Fits: Polaris Full Size Ranger W/PRO-FIT Cages (54” wide on top of the cage, non-round tube) Including: •
2017-21 Ranger XP1000 (see drop down for 2018 and newer Ranger XP1000) •
2013-18 Ranger XP900 •
2015 Full-Size 570 •
2016 Ranger XP570 •
2016-18 Ranger Diesel •
2013-15 Ranger XP900 Crew •
2016-18 Ranger Crew 570-6 •
2016 Ranger Crew XP900-6 •
2017-21 Ranger Crew XP1000
If want a less expensive polycarbonate windshield see P/N:11898. If you have a MID-Size Ranger with a 51" wide cage (measure the top of the cage) see P/N: Mid-Size-13359.
Made from Hard Coated Polycarbonate.
Virtually un-breakeable under normal use (unlike cheaper acrylic competitors use).
Adjusts to three position; Flipped Up/Open, Closed, and Vented.
Can easily be removed without any tools on warm days.
Installs in about an hour or less.
Works with factory top and doors.
Made In Cleveland Ohio.
Now, you can have the best of all windshields. This windshield adjusts to three different positions; Full open when driving less than 5 MPH, Fully Closed on cold days or Vented on hot days. It can even easily be removed without any tools if desired. Works with Factory Top and Doors and EMP Tops P/N's; 12044 and 11894
NOTE: 2017 Ranger XP1000 take the part as shown. 2018 and newer Ranger XP1000 will take P/N 13614 from the drop down (this model has two cup holders in the center of the dash). The 2018 Crew XP1000 is still the old body style and takes it like it shown
NOTE: When installing you do have to drill to ¼” diameter holes in the dash for the latching mechanism using the supplied template.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions. Some of the pictures are on the Mid-Size Rangers and for reference only.
Item #: 13395-FULL-SIZE (60" Wide)Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900 |Polaris|UTV Parts & Accessories
Hand Operated UTV Wiper for Hard Coated Poly Windshields OnlyNew0855135005112
Polaris RZR/UTV Hand Operated Wiper
Choose Size from drop down:
P/N: 12841
12" Blade
15" from the center for the handle to the end of the wiper
Mounts to Hard Coated Polycarbonate Windshields
You must drill a 1/2" hole in your windshield to mount it.
OR
P/N: 13180
16" Blade
18" from the center for the handle to the end of the wiper
Mounts to Hard Coated Polycarbonate Windshields
You must drill a 1/2" hole in your windshield to mount it.
This is a universal UTV wiper. We give you all the dimensions needed to verify fitment for yourself. It has been mounted on the following vehicles:
Kawasaki MULE
Kawasaki TERYX
Polaris Ranger
Polaris RZR
KUBOTA RTV
John Deere Gator
CASE
Kymco UXV
Arctic Cat Wildcat
Can-Am Maverick
Can-Am Commander
Yamaha Rhino
Yamaha Viking
This item is eligible for free ground shipping via USPS only. If you chose to ship via another carrier our website will figure shipping for you. Shipping is included to the lower 48 states only.
Item #: Hand WiperExtreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® 4|RZR® 570|RZR® 900|RZR® 900-4|RZR® XP1000 (XP1K)|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Gator|Mule™|Teryx®|Teryx4™|RTV|Rhino|Viking
Light Bracket for Polaris Ranger PRO-FIT style cageNew
This item is eligible for free shipping to the USA.
P/N: EMP-12878
If you want to mount a 50” light bar on your Ranger see P/N: 13552.
Polaris Ranger/General Pro Fit Cage Light Bracket set.
2013-2019 Polaris Ranger XP900 w/ Pro Fit Cage
2017-20 Ranger XP1000 w/Pro-Fit Cage
2015-2018 Polaris Ranger Full –Size 570 w/ Pro Fit Cage
2015-2020 Mid-Size Rangers w/ Pro Fit Cage.
2016-20 General w/Pro-Fit Cage.
2018-2020 Can-Am Defender
Laser Cut and CNC formed.
Sold as a set of two brackets.
Powder Coated-Black.
No drilling or cutting required.
Made In Cleveland Ohio.
You can bolt these right to your Pro Fit cage. The holes on the brackets for the lights is .375” diameter. You can mount these anywhere vertically on your cage sides. NOTE: the Pro Fit cage is the non-round cage designed for Polaris cab accessories.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 12878Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900
Polaris Ranger 50" LED Light Brackets for the PRO-FIT Cage.New
This item is eligible for free shipping to the USA.
Polaris Ranger 50” LED Light Bar Brackets
P/N: 13552
Does not include the LED Light bar. This is just the bracket set that clamps to the Pro-Fit cage.
2017-20 Ranger XP1000.
2013-19 Ranger XP900.
2015 Full-Size 570.
2016-19 Ranger XP570.
2016-17 Ranger Diesel.
2013-15 Ranger XP900 Crew.
2016 Ranger Crew 570-6.
2016-19 Ranger Crew XP900-6.
2017-20 Ranger Crew XP1000.
Sold as set (Drivers and Passenger’s sides).
No Drilling or cutting.
Allows you to mount a 50” LED Light bar to your Pro-Fit cage.
1” slots allow for variations in the light bar outside dimensions.
Mounts lower or high.
Made In Cleveland Ohio.
Now, you can mount a 50” LED light bar to your Full-Size Ranger’s Pro-Fit cage without any cutting or drilling. These brackets can be mounted low or up high since they clamp to the cage (no drilling or cutting required). The one inch long slots allow for some variation in the Outside Dimensions of your light bar.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13552Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900 |Polaris|UTV Parts & Accessories
Polaris Ranger and General Light Duty Tie-Down PlungersNew0855135005440
Polaris Ranger and Polaris General Light Duty Tie Downs
Fits: all year and models Rangers and Generals
Great for securing light items such as Chainsaws.
Fits: Ranger and General Bed Holes (about 1-1/2" Diameter).
Set of Four
Simple and Effective products from Extreme Metal Products, LLC
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13156-10Extreme Metal Products, LLCGENERAL™ 1000 EPS|RANGER® XP1000|RANGER® - Full Size|RANGER® - Mid Size|Polaris|UTV Parts & Accessories
2009-2014 Full Sized Ranger models (not 900 models)
2010-2014 Full Sized Ranger Crew models (not 900 models
2010-2014 Mid Size 400/500 (without EPS)
2011-2014 Mid Size 570 (without EPS)
2010-2014 Mid Size 500/800 Ranger Crew
Please Note: will NOT fit the Ranger 570 midsized models with Power Steering
Please Note: will NOT fit Ranger XP 900 models
Please Note: the defrost vents WILL interfere with the Polaris After Market Full Steel Cab Enclosure
Please Note: 570s will not achieve full heat unless you are operating at 3000-4000 rpms.
Ranger - HT_CP-404
2013-2017 Ranger XP 900 models
Two 360° adjustable airflow louvers
Adjustable temperature setting
Defrost components are included
Runs up to 14,600 BTU / 135CFM
Three speed fan control
High-grade radiator hose - rated -40° to 120° Celsius
Patented Unicoil for professional installation
High performance alloy Y connector
Runs up to 14,600 BTU / 135 CFM
Draws 4.5 amps on a 12V battery
Includes all necessary hardware and installation instructions
Injection molded housing eliminates sharp corners and protects knees
Dimensions: 5" (H) x 12" (W) X 13" (D)
Includes 3 Year Warranty
Cab heaters are custom made with laser-cut, powder coating brackets designed to fit your Polaris Full Size Ranger. These heaters make it much more enjoyable to use your UTV comfortably when the temperature outside is not cooperating.
Pictures are provided for reference only. EMP reserves the right to make product changes or improvements at any time.
Item #: RGFS-CP-HTRExtreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900
Polaris Ranger Folding Mirror set for the PRO-FIT Cage (non-round cage)New
Polaris Ranger XP900, XP1000 and Ranger 570 Folding Mirror Set.
These mirrors fit the Ranger Models that have the PRO-FIT Cages (non-round tube).
Fits: 2013-18 Ranger XP900, 2017-21 Ranger XP1000 (if you have a 2018 Ranger XP1000 see P/N: 13609 from the drop down menu), 2015 Full Size Ranger 570, and 2015 Mid-Size 570, 2016-21 Ranger 2 Seat.
ABS housings.
Sold as a set of two.
Ball jointed for adjustment.
Fold in so they are out of the way on tighter trails.
Made specifically for the Ranger with PRO-FIT Cages.
Mounting Brackets included.
Will not work with factory doors.
Mounts to your Ranger in minutes using your stock hardware.
The 2018 Polaris Ranger XP1000 takes a different mounting bracket. See the pictures in the drop down menu when adding this item to your cart. The 2018 Ranger XP1000 requires P/N 13609 and the other models require P/N 11969.
Replacement mirrors can be ordered from the drop down window. In other words, if you break one mirror you can buy a replacement without buying the whole mirror set.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 11969 or 13609Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900
• Rotomolded Gun Boot Protects your firearm from the elements and allows safe transport to your hunting blind.
• Includes: Rotomolded Gun boot, liner, bracket and plunger set.
• Can be removed in seconds without any tools. Position your Gun Boot against the back of your cab or on the side rail of your bed using our plungers.
• Made in the USA.
• Hunter tested and hunter approved.
Protect your firearm during trail transport with this Rotomolded gun boot and bracket set. Once installed, your firearm can be easily removed and the mount stays attached to the bed of your Ranger.
Item #: 13499Extreme Metal Products, LLCPolaris|UTV Parts & Accessories
Fits: Polaris Full-Size Ranger W/Pro-Fit Cages (54” wide on top of the cage, non-round tube. If your measure about 50" then you have a Mid-Size Ranger and this will not fit)
P/N: EMP-13513-Blank-Black
Replaces the stock panel
Can be cut to fit most stereos including 9 Din Size Automotive stereos.
Can be cut out for up to (9) Rocker Switches
Including:
•
2017 Ranger XP1000 (will not fit 2018 Model)
•
2013-18 Ranger XP900
•
2015 Full-Size 570
•
2016 Ranger XP570
•
2016-17 Ranger Diesel
•
2013-15 Ranger XP900 Crew
•
2016-18 Ranger Crew 570-6
•
2016-18 Ranger Crew XP900-6
•
2017 Ranger Crew XP1000 (will not fit 2018 Model)
•
2017-18 Ranger Crew XP900
Item #: 13513- Stereo PanelExtreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900 |Polaris|UTV Parts & Accessories
Polaris Ranger In-Dash Stereo Panel with Stereo (Pick your Stereo from Drop Down)New
Fits: Polaris Full-Size Ranger W/Pro-Fit Cages (54” wide on top of the cage, non-round tube. If yours measure about 50" then you have a Mid-Size Ranger and this will not fit)
Choose your stereo options from the drop down
Replaces the stock panel
Can be cut out for up to (9) Rocker Switches
Including:
•
2017 Ranger XP1000 (will not fit 2018 Model)
•
2013-18 Ranger XP900
•
2015 Full-Size 570
•
2016 Ranger XP570
•
2016-17 Ranger Diesel
•
2013-15 Ranger XP900 Crew
•
2016-18 Ranger Crew 570-6
•
2016-18 Ranger Crew XP900-6
•
2017 Ranger Crew XP1000 (will not fit 2018 Model)
•
2017-18 Ranger Crew XP900
Item #: 13513- Stereo Panel-With StereoExtreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900 |Polaris|UTV Parts & Accessories
Polaris Ranger Rear Light Brackets (Fits: Rangers with PRO-FIT Cage)
P/N : 13586
2017 Ranger XP1000
2013-18 Ranger XP900
2015 Full-Size 570
2016-18 Ranger Diesel
2016-18 Ranger XP570
Mounts to the rear door brackets to shine over the cargo area.
3/8” Diameter holes for lights.
Laser Cut and CNC Formed to insure a perfect fit.
Sold as set (LH and RH).
11 Ga (1/8”) American Steel.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13586Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900 |Polaris|UTV Parts & Accessories
Polaris Ranger One-Piece Top (Fits: Full-Size Rangers with PRO-FIT Cage) New0810830030036
Full-Size Polaris Ranger Polyethylene Top (fits: PRO-FIT Cage, about 54” wide across the top of the cage)
P/N: EMP 13502-54"
If the top of your PRO-FIT Cage measures about 54" wide across the top of the cage this will fit. If yours measure about 51" then you have a Mid-Size Ranger and should see P/N 13020. The PRO-FIT cage is the non-round tube or often called profile tube. Both the Full-Size and Mid-Size Rangers use this style tubing. If you want an aluminum top see P/N: 12044.
•
2017-21 Ranger XP1000
•
2013-18 Ranger XP900
•
2015 Full-Size 570
•
2016-18 Ranger XP570
•
2016-18 Ranger Diesel
Made from thick .188” Polyethylene.
Protects from the rain and sun.
Front and rear gutters divert water to the sides.
Top Gutters divert water to the rear gutter.
Will work with most doors and windshields.
No Drilling required.
Installs in minutes.
Drop down area in the front makes a great place to mount up to a 20" Light bar.
Ships to your door via Fed Ex or UPS.
Add protection and comfort with this stylish and durable top. Its lightweight, durable and provides protection from the rain and sun. It will work with most aftermarket cab components. Installs in minutes without any cutting or drilling.
Better pictures coming soon!!
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13502Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900 |Polaris|UTV Parts & Accessories
Polaris Ranger Smack Back Mirrors for PRO-FIT Cages Set (pick your mirror size)New
Polaris Ranger Smack Back Mirror Set (Fits: PRO-FIT Cages only)
P/N: 13483-13156 Mirror Set (pick your mirror size from the drop down)
Fits: Polaris Full-Size Ranger W/Pro-Fit Cages (60” wide on top of the cage, non-round tube)
•
2017-18 Ranger XP1000
•
2013-17 Ranger XP900
•
2015 Full-Size 570
•
2016 Ranger XP570
•
2016-17 Ranger Diesel
•
2013-15 Ranger XP900 Crew
•
2016 Ranger Crew 570-6
•
2016 Ranger Crew XP900-6
•
2017 Ranger Crew XP1000
•
2017 Ranger Crew XP900
Fits: Polaris Mid-Size/2-Seat Ranger W/Pro-Fit Cages (50” wide on top of the cage, non-round tube)
•
2015 Mid-Size ETX
•
2015 Mid-Size 570
•
2016 2-Seat 570
•
2015-18 EV & EV LI-ION (Electric)
•
2016-18, 2-Seat 500
•
2016, 2-Seat 570
•
2017-18, Ranger Crew 570-4
Sold as set of two (Drivers and Passenger Side).
Pick either 5-1/2 Convex or 8" x 4" Rectangle Mirrors (pick from the drop down option)
Smack back feature allows them to fold out of the way on impact.
Extendable
Mount to stock side net bolts.
Will work with factory doors although the view is somewhat obstructed with the doors installed.
These Smack Back mirrors are great for tight woods riding or simply loading your Ranger into an enclosed trailer. The Smack Back (folding) feature will give clearance upon light impact. It bolts to the stock torx bolts that hold the side nets in place.
These will fit Rangers with the PRO-FIT Cages.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13483-13155Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |Polaris|UTV Parts & Accessories
Polaris Ranger Under-Dash Speaker Pod Set (6-1/2” Speakers)
Fits: Polaris Full-Size Ranger W/Pro-Fit Cages (54” wide on top of the cage, non-round tube)
Including:
•
2017 Ranger XP1000
•
2013-17 Ranger XP900
•
2015 Full-Size 570
•
2016 Ranger XP570
•
2016-17 Ranger Diesel
•
2013-15 Ranger XP900 Crew
•
2016 Ranger Crew 570-6
•
2016 Ranger Crew XP900-6
•
2017 Ranger Crew XP1000 (will not fit 2018 XP1000)
Order with speakers or add your own speakers (choose option from drop down menu)
Thermoformed from ABS Plastic.
Sold as a set of two (with or without speakers).
Holes must be drilled for factory style Push Rivets.
Perfect for Custom Ranger Projects.
Made in USA.
Now, you can mount 6-1/2” Speakers under the dash on your Polaris Ranger. These stylish speaker pods hold a 6”-6-1/2” Speaker or buy them with the speakers included. They install with factory style plastic push rivets. You must drill 5/16” holes for the rivets.
Pair these with the EMP In-Dash Stereo P/N: 13513 to complete your stereo system.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13560Extreme Metal Products, LLCRANGER® - Full Size|RANGER® XP900 |Polaris|UTV Parts & Accessories
Polaris Ranger Windshield & Cab Back Combo (Full Size Rangers with 60" wide Pro-Fit Cage)New0855135005624
Ranger Cab Windshield and Cab Back Combo
•
2017-21 Ranger XP1000
•
2013-19 Ranger XP900
•
2015-18 Full-Size 570
•
2016 Ranger XP570
•
2016-17 Ranger Diesel
•
2013-15 Ranger XP900 Crew
•
2016-18 Ranger Crew 570-6
•
2016-19 Ranger Crew XP900-6
•
2017-21 Ranger Crew XP1000
•
2017 Ranger Crew XP900
Windshield Features:
Made From 3/16" thick Hard Coated MR-10 Lexan (Polycarbonate, not cheap acrylic like others on the market).
Removes in a few minutes without any tools using our custom thumbscrews.
DOT Rated with the stamp etched in the bottom corner.
Made In Cleveland, Ohio.
Made from Hard Coated MR-10 Polycarbonate (Lexan), so it is much more scratch resistant than others, and will hold up well to standard use. Polycarbonate is virtually unbreakable. Made to contour to the cage on the XP900, ensuring a great fit. Attaches with custom fabricated brackets with thumbscrews, so that you can easily remove your windshield without any tools. Gasketed on all sides.
Cab Back Features:
Made from 3/16" thick Hard Coat Polycarbonate, not cheap acrylic like others on the market.
Fits inside the rear of the cage.
Attaches with bolts (one self tapping bolt).
Foam gasket included.
Made In Cleveland, Ohio.
This fits the Pro-Fit cage. This is the cage that is not round. If you have a Ranger with 1-3/4” round tubing this will not fit.
Item #: 11898-11893Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900 |Polaris|UTV Parts & Accessories
Attaches to the holes in the stock cargo bed with rubber plungers.
Powder Coated.
DOES NOT INCLUDE THE BUCKET PICTURED.
This is any easy way to keep your tools or other items from sliding around in your bed. The bucket can easily be removed. Great for working around your estate. Grab your tools ang bucket and go. Also, holds bucket while the bed is dumped.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13461Extreme Metal Products, LLCGENERAL™ 1000 EPS|RANGER® XP1000|RANGER® - Full Size|RANGER® XP900 |RZR® 570|Polaris|UTV Parts & Accessories
Fits: Polaris Ranger and RZR, Yamaha Rhino, John Deere Gator,
and Kawasaki Mule 3000/3010 and 4000/4010 FRONT CAGE RAILS ONLY.
Fits: 1-3/4" diameter tube.
Easily attach windshields and other accessories to your UTV with these Patent Pending "Quick Connect Clamps".
Includes: Thumbscrews.
Made in the U.S.A.
After you install the clamps on your cage you can easily remove your windshield without any tools. Simply, remove the thumbscrews and the clamps remain on your cage.
If you have any model besides the ones listed above, please measure your tube O.D. before ordering.
Item #: 9881Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® 4|RZR® 570|RZR® 900|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |SPORTSMAN® ACE™|Wildcat|Gator|Mule™|Rhino
Ranger Polyethylene Top (Fits: both 50" and 60" wide models with the Pro-Fit Cage)New
Ranger Polyethylene Top (Fits: both 50" and 60" wide models with the Pro-Fit Cage.
Fits: 2013-18 Ranger XP900, 2017-18 Ranger XP1000, 2015 Full-Size 570, 2016-18 Full-Size 570 Ranger with the Pro-Fit Cage and 2015-18 Mid-Size Ranger (NOTE: This will fit the models listed with Pro-Fit Cage. Where it gets tricky is it will not fit the 2016 Full-Size Ranger 570 with round tubing, see P/N 11089). In other words, if you have a 2013-17 50" or 60" wide Ranger with a Pro-Fit Cage this will fit.
Add style and function to your Ranger with this top.
Made from 3/16" Thick Black Polyethylene.
Designed to match the body of a Ranger.
Attaches with hardware provided (no drilling or cutting into your cage).
Ships in two telescoping halves that you stick together with double sided tape provided.
Mounting hardware holds the together after installation.
Ships Regular ground shipping to your door (not oversized).
Made In Cleveland, Ohio.
Item #: 11894Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |Best Sellers
Fits: All models with the PRO-FIT cage (non-round tubing)
Sold as set of two (Driver’s and Passenger’s sides)
Powder Coated Black
Mounts behind the side net brackets using the stock bolts.
Works with and without the factory doors pictured.
Laser Cut and CNC formed to insure a perfect fit.
Made in Cleveland Ohio.
Now, you can easily mount lights to the side of your Ranger PRO-FIT Cage.
Does not include the lights pictured. Only a set of brackets.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Item #: 13483Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR® 900|Polaris|UTV Parts & Accessories
Ranger XP900, Full Size 570, and Ranger XP1000 72" Snow PlowNew
Polaris Ranger 72" Snow Plow
Fits: 2013-18 Ranger XP900, 2015-18 Full Size Ranger XP570, 2017-19 Ranger XP1000 and 2017-18 Ranger Crew XP1000 (These models are 60" wide and have the Pro-Fit Cage, non-round tubing)
Fabricated from A36 American steel (not soft Chinese steel).
All parts are laser cut to ensure a perfect fit, then MIG welded.
Powder coated for superior protection
Plow blade is 20" high and 72" wide.
Plow frame is made from 1/4" and 3/8" thick steel.
Attaches in less than a minute with two hitch pins.
Plow raises and lowers with your winch.
Includes: Ranger mounting plate.
Includes plow shoes.
Plow blades are 20" high (higher than others) and 72" wide.
The mold boards are made from 14 gauge steel and have 1/4" thick laser cut braces. They feature manual angle adjustment (left, right, center positions) or an optional electric over hydraulic power angle (sold separately, see Power Angle). Our wear blade is made from AR plate (Abrasion Resistant Steel) and is 4" high. Others on the market are much thinner and shorter, wearing out much sooner.
EMP plow frames are laser cut from 1/4" and 3/8" thick steel. The parts fabricated with the tab and slot method. In other words, the parts fit together like a puzzle before welding. This ensures a perfect fit every time.
Our plow mounting system mounts to the front and underside of the UTV with the supplied hardware. The mount can easily be removed at the end of the season with six bolts. The plow attaches in less than a minute with the supplied hitch pins.
This assembly does not include a winch mount. If you need one, please see #11879. It is also pictured in some pictures with our Optional Electric/Hydraulic Power Angle that is not included.
(Residential Consumer use only. Do not “Ram” plow or use vehicle speeds in excess of 5 mph.)
Item #: 10864-11218-11226-12360-12393Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900
Shipping: This product ships in multiple boxes, which the website cannot figure into the shipping charge. Therefore, a $50 handling fee will be added to all plow orders to help cover the shipping on the multiple boxes you will receive.
Price: $1,149.99
Ranger XP900, Full Size Ranger 570 and Ranger XP1000 Rear BumperNew
Ranger XP900, Full Size Ranger 570, and 2017 Ranger XP1000 Rear Bumper (Fits Ranger with the PRO-FIT CAGE ONLY, NOT INCLUDING NORTH STAR EDITION)
Fits: 2013-18 Polaris Ranger XP900 and XP900 Crew W/PRO-FIT Cage
2013-17 Ranger XP900 CREW W/PRO-FIT Cage
2015-18 Ranger 570 Full Size W/PRO-FIT Cage
2015-20 Ranger 570 Full Size Crew W/PRO-FIT Cage
2017-21 Ranger XP1000 and XP1000 Crew W/PRO-FIT (Will not fit the North Star or premium edition)
Includes: Mounting hardware and instructions.
Made from 1/8" and 3/16" Thick American Steel.
No cutting or welding needed to install.
Laser Cut and CNC formed for a great fit.
Dumps with the bed.
Laser Cut "EMP" logo.
Made in Cleveland, Ohio.
Add style to the back of your Ranger with this American made rear bumper. The ends are welded and ground smooth, then the bumper is powder coated with a mini-texture black for superior protection. This bumper is made from 1/8" thick steel and the mounting brackets are 3/16" thick.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions. Items with free shipping that are returned will have the original shipping costs plus any restocking fees deducted from the refund. Shipping costs on this item range from $25-35.00 to the lower 48 states.
Item #: 11958Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900
Ranger XP900, Full Size Ranger 570, Ranger XP1000 Front Bumper / Brush Guard with Winch MountNew855135005099
Polaris Ranger Brush Guard with Winch Mount
Fits: 2013-18 Ranger XP900, 2015-18 Full Size Ranger XP570 and 2017 XP1000 (These models have the PRO-FIT cage and are about 55" if you measure the top of the cage)
Replaces your stock front brush guard.
All welds ground smooth.
1-1/2" Diameter Stinger Tube.
Made from 1/8" thick American Steel.
Texture powder coated for superior protection.
Laser cut and CNC formed to insure a great fit.
Two Winch Bolt Patterns (3" deep x 4.875" wide for regular spool and 4" deep x 6" wide for wide spool winches).
Made In Cleveland, Ohio.
Add style and function to the front of your Ranger XP900 with this brush guard. Mount your winch on top keeping it up high out of the mud and water. No more bending over to reach your cable.
If you would like to mount a winch and lights, you can use our brackets #10559 to mount the lights on the stinger tube.
Item #: 11899Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900
Ranger XP900, Full Size Ranger XP570 and Ranger XP1000 Cab Back / Dust Stopper (Hard Coated) (Fits: Pro-Fit Cage)New
Polaris Ranger Cab Back / Dust Stopper
Fits: 2013-18 Ranger XP900, 2017-21 Ranger XP1000, 2015-18 Ranger XP900 Crew, 2015-18 Full Size Ranger 570 w/Pro-Fit cage, 2015 Ranger 570 Crew, 2016 Ranger XP570 and 2017-20 Ranger XP1000 Crew (If your cage is the Pro-Fit cage these will fit, if is round tube cage they will not. The 2016 Full-Size Ranger 570 has a round cage and different front suspension) The 2016 Ranger XP570 has a Pro-Fit cage.
Made from 3/16" thick Hard Coat Polycarbonate, not cheap acrylic like others on the market.
Fits inside the rear of the cage.
Attaches with bolts (one self tapping bolt).
Foam gasket included.
Made In Cleveland, Ohio.
Item #: 11893Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900
Ranger XP900, Full Size Ranger XP570 and Ranger XP1000 Hard Coat WindshieldNew
Polaris Ranger XP900, Full Size Ranger XP570 and XP1000 Hard Coated Full Windshield w/Pro-Fit Cage
Fits: 2013-19 Ranger XP900 (including the XP900 Crew), 2015-18 Full Size Ranger XP570, and 2017-20 XP1000 (including the XP1000 Crew) W/ Pro-fit Cage.
NOTE:These are the 60" wide models with the Pro-Fit Cage (non round tube).
Made From 3/16" thick Hard Coated MR-10 Lexan (Polycarbonate, not cheap acrylic like others on the market).
Removes in a few minutes without any tools using our custom thumbscrews.
DOT Rated with the stamp etched in the bottom corner.
Made In Cleveland, Ohio.
Made from Hard Coated MR-10 Polycarbonate (Lexan), so it is much more scratch resistant than others, and will hold up well to standard use. Polycarbonate is virtually unbreakable. Made to contour to the cage on the XP900, ensuring a great fit. Attaches with custom fabricated brackets with thumbscrews, so that you can easily remove your windshield without any tools. Gasketed on all sides.
This fits the Pro-Fit cage. This is the cage that is not round. If you have a Ranger with 1-3/4” round tubing this will not fit.
Item #: 11898Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900
Fits: 2013-18 Ranger XP900, 2017-18 Ranger XP1000, 2017-18 Ranger XP1000-4, 2014-18 Ranger 900 Crew, 2015 Full Size Ranger 570 and the 2016 Full Size 570XP (If your cage is the Pro-Fit cage these will fit, if is round tube cage they will not. The 2016 Ranger 570 has a round cage and different front suspension)
Protects your expensive CV Joints from sticks and brush.
Engineered for the Ranger XP900 and Full Size 570.
CNC cut and formed to ensure a perfect fit.
Powder Coated Black for superior protection.
Sold as a set of four (front and rear).
Includes: Mounting Hardware.
Install in minutes without any drilling or cutting.
Made from 1/8" Steel.
Made In Cleveland, Ohio.
These are our Steel Version. Some of the pictures show our aluminum version (#12007) to show how they mount.
Protect your expensive CV Boots and Control Arms from sticks, brush and rocks with these guards. Sold as a set of four for the front and rear.
Note: some of the pictures show our aluminum version. You will be getting the black steel version.
Item #: 12008Extreme Metal Products, LLCRANGER® - Full Size|RANGER® XP900
Ranger XP900, Ranger 570 Full Size, Ranger XP1000 Diamond Plate Floor Boards (set of two)New
Polaris Ranger Diamond Plate Floor Boards (set of two)
Fits: 2013-18 Ranger XP900 and 2015-18 Ranger 570, 2017(not 2018) Ranger XP1000 (these models are 60" wide and have the PRO-FIT Cage, non-round tubing)
Will not fit any Full Size Rangers with round tubing cages, Only PRO-FIT cages.
CNC Cut from Aluminum Diamond Plate.
Sold as a set (drivers side and passengers side).
Attaches with supplied Rivets.
Can be used to dress up your Ranger, or to fix a hole in the floor boards.
Item #: 11892Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900
Polaris Ranger 2013-18 XP900, 2015-17 Full Size Ranger XP570, 2017 Ranger XP1000 Winch Mounting Plate (The Full-Size models with the PRO-FIT cage)
Fits: 2013-17 Ranger XP900, 2015-16 Full Size Ranger 570, 2017 Ranger XP1000 and 2018 XP1000-Crew (these models are 60" wide and have the Pro-Fit cage, non round cage)(If you have a 2018 XP1000, see P/N 13613).
Fits most major brand UTV winches up to 4500 lbs.
Mounting holes for both regular winches and wide spool winches.
Bolt patterns- 6-5/8" wide x 3" deep (wide spool) and 4-7/8" x 3" deep (regular spool).
Fairlead bolt patterns- 4-7/8" (regular) and 6" Centers (wide).
Powder Coated Black for superior protection.
Laser Cut and CNC formed to ensure a great fit.
Made In Cleveland, Ohio.
Item #: 11879Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900
Ranger XP900, Ranger XP570 and Ranger XP1000 Aluminum Top (Fits: Pro-Fit Cages)New
Polaris Ranger Aluminum Top
Fits: 2013-18 Ranger XP900, 2015 Full Size Ranger 570, 2016-18 Ranger XP570, 2017-21 Ranger XP1000 (If your cage is the 60" wide Pro-Fit cage this will fit, if is round tube cage this will not. The 2016 and 2017 Ranger 570 has a round cage and different front suspension)
If you have a Ranger XP900 Crew or Ranger XP1000 Crew, see P/N: 13291.
Bolts to your cage in minutes.
Much lighter than similar steel tops.
Made from light Aircraft Grade Aluminum nearly 1/8" Thick (.100"). Others on the market are made from heavy steel. We try to keep the center of gravity low by using Aluminum.
Laser cut and CNC formed to insure a great fit.
Gaskets and foam seal between the top and cage.
Powder Coated Texture Black for superior protection. (White is available on special order, allow 2-3 weeks.)
Will work with factory doors, windshields, and cab back.
Formed gutter on the front diverts water to the sides.
Includes: Mounting hardware and instructions.
Made In Cleveland, Ohio.
Pictured with EMP Hard-Coat Full Windshield #11898 and EMP Cab Back #11893.
Item #: 12044Extreme Metal Products, LLCRANGER® XP1000|RANGER® - Full Size|RANGER® XP900
Two-Way Rocker Switch, housing, and mounting bracket.
6 month manufacturer Warranty.
Includes: Wiring Harness.
Chrome Shaft.
Now, you can add a power angle to your EMP snow plow. Easily adjust the angle of your UTV plow without getting out of your seat. The unit features overload protection, so if you hit something hard enough the actuator will give instead of breaking something on the plow or vehicle. Then simply wait two seconds and it will reset itself so you can start plowing again. Over three years of testing has been done on this unit. The Actuator/Cylinder is made in Japan.
Item #: WSM13354331Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® 4|RZR® 570|RZR® 900|Commander|Maverick (XC, DPS, XMR and Max)|Mule™|RTV|Viking
Universal LED Light Bar Wiring Harness (includes Polaris Pulse Bar Plug)New
Universal LED Light Bar Wiring Harness for UTV's.
Universal fit for most UTV's.
Includes: Optional Pulse Bar Plug for Polaris Rangers, RZRs and RS1 so you can plug and play.
Water proof plugs.
Automotive Style Fuse.
Can be used for one or two LED light bars or Cube lights (must be LED).
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions. Items with free shipping that are returned will have the original shipping costs plus any restocking fees deducted from the refund. Shipping costs on this item range from $25-35.00 to the lower 48 states. Dealer orders of 5 or more will be have the boxes taped together for free shipping.
Item #: 14167Extreme Metal Products, LLCPolaris|Arctic Cat|Can-Am|CF Moto|Honda|John Deere|Kawasaki|Kubota|Mahindra|Yamaha|UTV Parts & Accessories
Easily remove your windshield in seconds without tools.
Allows you to remove your windshield so you can trailer your machine.
Designed for UTV / SxS windshields.
Also works great for license plates.
Attach your windshield to your ROPS with this rubber fast strap. Simply wrap around your cage and hook back to the strap itself. Now, one size fits all up to 2" diameter.
Sold to other manufactures in bulk. Call for pricing.
Warning/Caution:
These are designed for attaching windshields and license plate to UTV Roll Cages/ROPS only. Serious injury or death could result if these are used for other purposes. Windshields should be removed when on a trailer over 50 MPH. Serious injury or death could result if not removed at faster speeds.
Item #: 11651Extreme Metal Products, LLCRANGER® - Full Size|RANGER® - Mid Size|RANGER® XP900 |RZR®|RZR® "Cooter Brown" Product Line|RZR® 4|RZR® 570|RZR® 900|RZR® XP H.O. Jagged X Edition|RZR® XP1000 (XP1K)|RZR® XP1000 - 4 |RZR® S 1000|SPORTSMAN® ACE™|Wildcat|Wildcat Sport|Wildcat Trail|Commander|Maverick (XC, DPS, XMR and Max)|Maverick MAX|Big Red|Pioneer|Gator|Mule™|Teryx®|Teryx4™|RTV|Rhino|Viking|Wolverine
Windshield Clamps for Polaris Ranger (PRO-FIT Cage), Can-Am Defender, Maverick Sport and Maverick Trail with the profile tube ROPS.New
P/N : 11898-02 Windshield Clamp Set.
These are great for people who want to make their own windshields. Designed for Tool-Less removal
Made for the Polaris Pro-Fit Cage and Can-Am Profile ROPS.
Sold as set of four.
Includes: Thumbscrews for Tool-Less removal.
Sold as replacements or hardware for custom windshields.
The Clamps are made in the USA.
Made to match the profile of the Polaris PRO-FIT Cage and the Can-Am Profile cages. Including: Full-Size Rangers, Mid-Size/2 Seat Rangers, Ranger Crew, Can-Am Maverick Trail, Maverick Sport and the Can-Am Defender. These are the Non-Round tube cages.
These can be used as replacements for EMP® P/N's; 11898 Ranger Windshield, 12711 Mid-Size Ranger Windshield, 13524 Maverick Sport/Trail Cab Back/Dust Stopper, 13547 Maverick Trail/Sport Glass Windshield, 13523 Maverick Trail/Sport Polycarbonate Windshield and the Can-Am Defender.
We reserve the right to make modifications/improvements to our products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions. This item has free shipping to USA. Any returns will have he original shipping of $8-$10 deducted from the refund and our standard terms and conditions apply.
Item #: 11898-02 (set of four)Extreme Metal Products, LLCRANGER® XP1000|RANGER® XP900 |Maverick MAX|Maverick Trail |Polaris|Can-Am|UTV Parts & Accessories
