Yamaha Wolverine Snow Plow and RMAX

Yamaha Wolverine and RMAX Snow Plow.

These UTV Snow Plows are made to handle the toughest conditions and hold up against sand, snow and ice. With a 65 degree attack angle and over center design, the heavy duty plow blade ensures snow rolls up and is thrown forward. The central mounting position of the plow kit disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. Our easy-connect design makes for a quick attachment of the plow to your UTV for when the snow begins to fly. Then, when winter draws to a close, take the plow back off in a matter of minutes.

The durable snowplow mount plate is specifically engineered to fit the frame of your UTV and can remain on your vehicle year round. Please Note: All of our Plow Systems require a winch (not included). Plows are designed to fit stock UTVs.

We recommend our VIPER Elite, VIPER Max, or VIPER Midnight winches.

Kit Contents: UTV Snow Plow Blade - Straight Push tubes Wear bar Skid Feet Installation Hardware and Instructions Blade Features: Snow Plow Blade (19 inches scoop) and leading horizontal supports are formed from a single piece of 11 gauge steel Four 7 gauge ribs run the full height of the blade Three additional 7 gauge horizontal stabilizers support the deepest point of the blade 65° attack angle and over center design ensures snow rolls up and is thrown forward Replaceable 7gauge steel wear bar included with every kit Height and angle adjustable skid feet included 3 Year Warranty Pushtube Features: Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength Turn system allows you to easily position your plow in 10 different angles - 0, 12.5°, 25° Simple detachment system with the pull of a pin Structural tube steel cross bar for added lateral rigidity Quick Release Pins included 13.5 inches center to center for plow mount.

Fitment: 

BR11729-

• 2016-2019 Yamaha Wolverine R-Spec EPS
• 2016-2019 Yamaha Wolverine R-Spec
• 2019          Yamaha Wolverine X2
• 2018-2019 Yamaha Wolverine X4
• Please note: 2016-2017 R-Spec Special Editions will require additional drilling out of two holes

BR11738-

• 2020-2021 Yamaha Wolverine RMAX
• Does NOT fit 2022 models.

BR11738A-

• 2022-2024 Yamaha Wolverine RMAX
  Does NOT fit 2021 and older models.

BR11770-

• 2 inch Receiver Plow Mount
• All machines with front 2 inch receiver already installed